Call Before You Dig

We need your help in preventing damage to our pipelines. The most common cause of pipeline damage happens when a third party unknowingly digs, blasts or drills near a pipeline. If you plan to dig or do any type of excavation or construction work, federal and state law requires you to call your local One-Call locating service. A TEPPCO representative will locate and mark the underground pipeline at no cost to you. Call before you:

Excavate	Grade
Auger	Bore
Tunnel	Dredge
Install water or sewer lines, septic systems or drains	Install drain tile
Install telephone, TV or cable lines	Cut or deepen ditches
Blast for clearing	Dig postholes
Repair or rebuild roads or driveways	Plant trees or shrubs
Build homes or additions	Install swimming pools

Remember -- make sure you "Dig Safely":

Any activity near or on a pipeline route can potentially cause damage to the line. If you plan to dig, blast or engage in any other activity that could damage our pipeline (or any pipeline), please contact your local One-Call Center before you dig, please call:

State One-Call Numbers:

A gouge, scrape, dent or crease to a pipeline or its coating may cause a break or leak in the future. If you cause what could be considered even minor damage to a pipeline, please contact TEPPCO immediately at 800-530-1050 (TEPPCO Products Pipeline), 800-220-1058 (TEPPCO Crude Oil Pipeline), 800-331-3381 (Seaway Crude Pipeline), or 800-666-0125 (Chaparral) so that we can investigate any possible damage.